Our Showrooms: Fairfax - 703.968.7727 | Fredericksburg - 540.548.1988 | Sterling - 703.444.7020

Logo
Billiard Tables by Presidential Billiards

Construction

The tables are primarily made from exotic African hardwoods. All of the timbers are harvested under the strictest conservation guidelines from established hardwood plantations or designated forests. Presidential Billiards does not cut virgin forests or harvest in any endangered habitat areas.

Cushion Rubbers
Presidential BCA approved K-66 profile cushion rubbers are used on all of their tables. This superior quality cushion rubber results in one of the liveliest and most accurate rails in the industry. The cushion rubbers have a thin layer of cotton canvas on the top and the back of the surface which results in greater accuracy and control.

Presidential Billiards is so confident that we have the best cushion rubbers in the industry that we include them in our lifetime warranty, unlike many other manufacturers.

Accurate Nose Height
The accuracy of the rebound is also determined by the nose height and angle of placement of the cushion rubber. The modern machinery in their factory precisely controls the placement of the cushion rubbers to the rail resulting in a uniform nose height and consistent angle.

Rail Bolts
Presidential’s high performing T-nut is used to attach the cushion rails to the slate. It is imperative to get a seamless transition between the rail and the slate as this provides the necessary strength and rigidity for proper playability. The T-nut allows the installer to get a greater torque resulting in a rail that sits perfectly flush to the slate.

Dome Washers
To prevent the rail bolts loosening over time Presidential uses dome washers which grips directly in to the slate.

Solid Hardwood Rails and Sights
The rails are machined to precise specifications and our sights are installed in the rails prior to the finish being applied which results in perfectly smooth sight, unlike many of our competitors where you can feel the sights protruding or recessed.

Machine Recessed Area on Rails
On the underside of the Presidential rail is a recessed area where the cloth and the staples nestle which prevents either of these interfering with the attachment of the slate. Should the cloth or staples protrude the seamless transition between the slate and the rail would be compromised.

Metal to Metal Construction
All bolts go directly into threaded metal inserts. The cabinet is joined together with sturdy metal brackets. This “bolt together” construction allows for disassembly of the cabinet and reassembly with no loss of structural integrity.

Heavy Duty Brackets
Compare the Presidential brackets used in the internal construction of their tables with other manufacturers and you will be amazed at the durability, strength and weight of the brackets we use.

Slate
Presidential only uses 1” slate on all of their tables. The slate is diamond honed to perfection to within ten-thousands of an inch and will provide a lifetime of playability. All of our slate has an attached framing that the cloth is stapled directly to. This framing allows for quieter play and professional cloth installation.

Finishing
The product is hand stained and finished to enhance the beauty of the woods they use. Between each application of stain the product is hand sanded using ultra fine grit sanding pads. The final stage is a minimum of three applications of the catalyzed lacquer which results in a beautiful durable finish.

Presidential stains and lacquers meet or exceed all international environmental standards.

Pockets
Hand tooled leather pockets in a variety of finishes compliment all of our traditional style tables. Top quality leather utilizing the old-fashioned pains-taking tanning and curing processes will provide years of reliable service. A choice of fringe or shield pockets in coordinating or contrasting finishes are available to compliment your table.

The modern style tables use an internal pocket which is available in either leather or hard rubber.

Unique Features and Finishes
While every effort is made to ensure that the product corresponds as closely to the sample shown in the retail stores, there might be a chance that they are not identical. We regret that no responsibility can be accepted for variations which all add to the unique features of the Presidential Billiards’ products.

Most of the furniture products are individually hand-finished & therefore there will be some slight differences between the items.

Some of our products are hand-finished to look ‘distressed’ or ‘old’. These products vary from product to product & is a unique design and not a defective product.